Workshop Pro Aerosol Range - Meeting the tough demands of the maintenance professional
Workshop Pro is a range of superior performance maintenance aerosol products suitable for a multitude of demanding applications.
MD4 MULTIPURPOSE MAINTENANCE SPRAY
Workshop Pro MD4 is an effective, damp start and penetrating fluid with outstanding corrosion protection properties. When applied to wet parts the chemistry of MD4 has a powerful attraction to the underlying surfaces and this completely displaces traces of water. Therefore this product is particularly useful as an engine damp start. A short spray on to the affected parts will displace any wetness and prevent voltage breakdown, allowing the engine to be started again normally. MD4 is also an effective penetrating fluid for freeing all seized and corroded metal parts. It has been designed with a very low surface tension, which gives it excellent penetrating power, and this, coupled with superior solvent and lubricating properties enables the most inaccessible corroded parts to be speedily dismantled. The residual oil film acts as a rust and corrosion preventative on the disassembled parts and helps reassembly.
Workshop Pro Carb Cleaner has a precise formulation, designed to remove dirt, grime and accumulated oily deposits from carburettors and fuel injection systems. It can also be used with great effect to restore carburettors in situ, or with ones partially dismantled, if these have become blocked, stuck or dirty. This makes Workshop Pro Carb Cleaner aerosol a vital part of any workshop.
Workshop Pro White Grease with PTFE is a scientifically prepared combination of calcium and zinc based grease with PTFE in an aerosol. Offering excellent resistance to water and heat and also long lasting protection against corrosion, and for use with bearings, hinges, gears, springs and O-rings. Note: Industrial use only, not for use in contact with food.
Workshop Pro Anti-Seize is a lead and CFC free compound, made from solvent refined oil, bentonite thickener and fine copper powder. The product is highly recommended as a thread lubricant on the external parts of all racing motorcycles, where rapid and trouble free disassembly is essential.
CHAIN LUBRICANT FULLY SYNTHETIC
Workshop Pro Chain Lubricant Fully Synthetic is specially formulated for ultimate protection of chains and sprockets in a variety of demanding applications. These include motorcycle chains, lift and drive chains, leaf and roller chains and conveyor system chains. This product is initially a thin flowing lubricant which when sprayed, searches and penetrates into the chain links and rollers. Within a few minutes the solvent carrier ‘flashes off' and the product thickens and provides a strong, cushioning and lubricating, grease like coating on all parts. This coating has powerful anti-fling properties and is not displaced by the fast movement of the chain. Chain and sprocket wear is reduced to a minimum by the lubricant coating.
CHAIN LUBRICANT SEMI-SYNTHETIC
Workshop Pro Chain Lubricant Semi-Synthetic is specially formulated for the protection of chains used in a variety of applications. This product is initially a thin flowing lubricant which when sprayed, searches and penetrates into the chain links and rollers. Within a few minutes the solvent carrier 'flashes off' and the product thickens and provides a strong, cushioning and lubricating, grease like coating on all parts. This coating has powerful anti-fling properties and is not displaced by the fast movement of the chain. Chain and sprocket wear is reduced to a minimum by the lubricant coating.
Workshop Pro Solvent Degreaser is a ready for use, pink coloured emulsifiable fluid, manufactured from a highly refined hydrocarbon solvent and a non-ionic surfactant. It was originally developed for rapid de-waxing of car bodies. The formulation acts by dissolving the wax or oil content and allowing them to be emulsified so that surfaces can then be washed clean with water. It has an extremely effective cleaning action on all surfaces even at low ambient temperatures. Workshop Pro Solvent Degreaser is also non-caustic and can be safely used on aluminium and magnesium alloys without fears of corrosion or corrosive residues on the surfaces. Workshop Pro Solvent Degreaser has an added advantage over other products of this type in that the oil content in the water washings produced will quickly separate in an interceptor system allowing clean water to be discharged to the sewer.
Workshop Pro Solvent Cleaner contains a complex mixture of hydrocarbon and oxygenated solvents designed to clean and degrease all flat and irregular surfaces. This product is free from chlorinated and other ozone depleting solvents. It is provided in aerosol form to provide an easy means of applying to surfaces, with the powerful jet allowing easy purging of blind holes and crevices. After degreasing, the solvent evaporates rapidly leaving components chemically clean and free from oily and corrosive residues. The low temperature resulting from rapid evaporation may, in some instances, be used for shrink-fitting of small mechanical parts. Note: Due to the flammability of the product Workshop Pro Solvent Cleaner is not recommended for use on electrical equipment, particularly where 'sparking' may occur.
Workshop Pro Surface Conditioner is a special blend of silicone, solvents and cleaners. It has been designed as a multipurpose product that cleans, restores and protects surfaces at the same time. When sprayed onto wet parts the chemistry of Workshop Pro Surface Conditioner has a powerful attraction to the underlying surfaces and this completely displaces all traces of water. This product is particularly useful as an engine damp start, a short spray onto the affected parts will displace any wetness and prevent voltage breakdown, allowing the engine to be started again normally.
Find out more about the Workshop Pro range by clicking here or speak to our sales team on 01743 232200.